RF Remote Control Blog

One of our customers wants to control 6 dc motors with transmitter. Each two buttons can switch every motor to rotate from different direction. That is to say, one button to make motor run one direction, another button to make motor go in the other direction. He is wondering if our product can satisfy his need. Here we recommend this model— 12 channel dc remote control switch (S12CA-DC09/12/24 & CV-12) includes one 12-button remote transmitter and one 12-channel receiver. Each remote button controls each channel of receiver on and off. It can be used to control at most 12 same or different on / off electrical devices. But it only can be used to control 6 motors for every two relays in the receiver can control one motor to rotate in forward and reverse. Remote distance is up to 500m. We will make a demonstration to this customer. First, we should prepare those materials. 1 x 12 channel dc remote control receiver (S12CA-DC12) 1 x 2-button remote transmitter (CV-12) 2 x dc12v ...

Our company manufactures Alfalfa Cubes for domestic and export use. In order to export this product we must load them into a 40' sea container. We use a potato pillar that has been modified for this purpose. It has a hopper to put the cubes into and screen out the fines, then the cubes travel up an elevator conveyor to a 20' boom conveyor that is inside the sea container. In order to maximize the weight we need the ability to move the boom left to right, up and down, and in or out. We also need to be able to stop and start the 2 conveyors. This is currently being done with electric solenoids over hydraulic and a control box with a cord back to main panel. The main problem with the corded control box is it is quite bulky and the 30' of cord is a chore to drag around. It also tends to get dropped so we have to replace the switches quite often, as well if the cord gets run over we will need to change it out or repair it. So we went looking for a cost effectiv...