RF Remote Control Blog

We will try to make motion detector led lamp with infrared motion detector (W-01) and rf receiver with time delay function (S1DA-DC12). The working distance of motion detector is 100m (open field). The detection distance is 10m. The rf receiver is an adjustable time delay receiver. Delay time can be adjusted as you like within 0 second~99 hours.   Online shop:  http://www.carymart.com/

We will try to make motion detector led lamp with infrared motion detector (W-01) and rf receiver with time delay function (S1DA-DC12). The working distance of motion detector is 100m (open field). The detection distance is 10m. The rf receiver is an adjustable time delay receiver. Delay time can be adjusted as you like within 0 second~99 hours. Online shop:  http://www.carymart.com/

There are 12 match places in the Karate Club. Each match place has one remote controller. The 12-channel receiver is put in the First Aid Room. When there is player being injured, press the remote to notify the First Aid Room in time. In order to know which place to go, each channel of receiver should be wired to such like small lamp for indication. Look at the picture, it is an multi-channel rf remote control transmitter & receiver model of 0020192 (S12CA-DC09/12/24 & C-1). It includes twelve remote transmitters and one 12-channel receiver. Each remote controls each channel of receiver. Wiring diagram is as follow: If there is player being injured, press the button of remote, the lamp will be on; the First Aid Room will react swiftly in the emergency. Online shop:  http://www.carymart.com/

An infrared sensor motion activated lamp is a security and energy saving feature which can be installed into dark home, hall, corridor or staircase. The lamp works by detecting motion in the room. Within the area of detection, the motion detector will be triggered by any movement, and then send signal to the lamp. So the lamp will come on automatically. The lamp will stay on as long as motion is detected. Here we talk about how to make an infrared sensor motion activated lamp using wireless movement detector and rf time delay receiver . Receiver specification: Model No.: S1D-DC12 Control Mode: Delay (Press -> ON; Then OFF after the delay time) Adjustable delay time: 2~40 seconds Coding Type: Fixed code by soldering Operating Voltage: DC12V Movement detector specification: Working distance: 100 m (Open field) Detection distance: 10m Detection range: Fan-shaped angle 110° Decode: Fixed code by Pins The wiring and operation images are as follows: Wire the rf receiv...

One of our customer said that he’d like to activate a hot water circulating pump in the upstairs bathroom from his kitchen which required a momentary start signal. The pump had its own power from 110/120V AC and timed operation. We recommend 1 Channel DC RF Momentary Remote Control Switch (S1M-DC12 & C-1) to him. The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. That means it will not cause electromagnetic interference during water pump operation. Simple wiring image is as follow: Press and hold the remote button, he can activate the hot water circulating pump. Online shop:  http://www.carymart.com/