RF Remote Control Blog

Overview: I’m looking for a High power remote controller to switch on/off the power to my children’s “John Deere ground force” 12v tractor if necessary. According to the specifications on the tractors the motors are 330watt and are driven by 12v battery. 330/12=27.5 amps. So I guess I need a 30amp controller. Solution:         We recommend the model of 1 channel 30amp 12V remote controller (S1PU-DC12&C-2). Its maximum current output is 30amp. It is suitable for appliances with AC110~240V or DC0~28V because of its normally open & closed relay contact. There are 3 working modes in it. The transmitting distance is about 100m (300ft). It is enough for you. You can see its wiring diagram. We suggest that you should learn this wiring way. That will be much convenient to you. Wire tractor’s motor to “A” terminal and negative terminal of receiver. Use a wire to connect “B” terminal and positive terminal of receiver. And wire positive and negati...

Question from customer: I am looking for a transmitter and receiver with at least 3 buttons (4 max ) to be used to open and close my gate. I don’t know which is better RF or UHF? Do you have anything that can work for me? I will do the electronics all I need is the option to latch or momentary relay outputs. Answer ： We recommend 4 channel 12V multi-mode remote controller (S4C-DC12+C-4). It operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete four operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc. We think this remote can be used for controlling gate. That is to say, you can use this remote control to control one or two motors of your gate. To realize gate opening and closing, one motor needs two relays ...

Question from Customer: I seek a transmitter-receiver 12V to run a small motor away from 300~500 meters with operating on off. Answer: Our suggestion is this 1 channel 12V voltage output remote control gadget (S1X-DC12-ANT2 & CB-2). Single channel is for one device. 12V direct power output can supply power directly to the device which is controlled. User can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The receiver, which mounts long range magnetic antenna, pairs with long distance transmitter to reach to 2000m in the open field. There are 3 control modes. They are Toggle, momentary and latched. Setting control mode Toggle: Only connect Jumper-2. 1) Press big button: Turn on the relay. Press big button again: Turn off the relay. 2) Setting control mode Momentary: Only connect Jumper-1. Press and hold big button: Turn on the relay. Release big button...

The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. You also can choose external antennas for them. With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle. Online shop:  http://www.carymart.com/