RF Remote Control Blog

Who says you can't motorize your swing shutters? Just like roller shutters, these are motorizable! So don't give up the advantages of automation anymore! Good reasons to motorize your swing shutters Motorize your swing shutters? It's about improving your comfort first. Once motorized, the swing shutters can be controlled remotely. Of course, this will reduce the constraints, especially for the elderly or people with reduced mobility but also, when the window is difficult to access. Always concerning the comfort, thanks to the motorization, the control, i.e. the closing of the shutters can be centralized. In this case, it is no longer necessary to go around the house to close the shutters one by one. The solution will also enhance home security. Quite simply because the motorization will increase the resistance of the shutters to attempted break-ins. Speaking of resistance, even in strong gales of wind, the closed position will always be maintained thanks t...

For aesthetic purposes or to dissuade intruders, the portal is not only used to welcome visitors! Here are some ways to choose the right portal model. What shape for my portal? Straight, sloped, curved, curved or gendarme hat? A matter of taste. A PVC gate that is too design can detonate in front of a traditional house, while a wrought iron gate will enhance it. But there are enough possibilities today for every home to find the "right" portal. What visual barrier? Added, a gate makes it possible to supervise the outside but does not protect from the glances. On the contrary, a full model preserves privacy, but, too high, creates the unpleasant impression of being locked up, especially if the ground is small. On the other hand, it is better to avoid (unfortunately, we often see some) an impressive portal with low walls on each side. We must ensure the right overall balance. Swing or sliding? The former usually open inwards. Otherwise, the law requires that the...

8 channel rf remote transmitter & receiver operates in 8 working modes. It can be used to control at most 8 on / off electrical devices. With characteristics of strong anti-interference, reverse power protection and over current protection. Three voltages dc9v, dc12v and dc24v are provided to choose. Widely applied to control every kinds of lights, electrically operated doors / gates / windows / blinds and so on. This video aims to show how to control 2 AC motor. Operational Video: Online shop:  http://www.carymart.com/

This RF wireless remote control switch system is ideal for turn on / off the house lights, garage door, motors, electric locks, etc in the range of about 100 meters !  You just take this 2 buttons remote controller and you can easily control all DC 0-28V or AC110 ~ 240V electrical appliances at home!  Moreover, the remote control switch easy installation and use conveniently!  It should be a good choice for you. This Video aims to show you how to control AC lamp with this remote control kit. Online shop:  http://www.carymart.com/

We have introduced the firework ignition with remote control or firework ignitor system in previous period. Now we try to use 9V direct power output remote control to set off firework. Besides reducing accidents like skin burn and accidental explosions, the most remarkable of this remote control for firework ignition is that there is no need to connect firework to any power supply. We have the following materials. 1× 1 channel 9V direct power output receiver （S1X-DC09） 1× one button transmitter (C-1) 1×electric firework 1×9V battery Connect wire of electric firework to positive and negative terminals on receiver. And connect 9V battery to receiver via connector. Press button, ignite electirc firework. Online shop:  http://www.carymart.com/

Question from customer: I need a control system for controlling a DC 12v engine, I seek to control the speed of rotation depending on the voltage applied. Answer: We recommend 2 channel motor speed adjustable remote controller — S2PFS-DC12 and CV-6-2. By comparison with other motor remote controller, this controller S2PFS-DC can control speed of motor rotation. It won’t depend on the voltage applied because two speed control knobs on the receiver are to adjust the speed of two motors separately.  You can control two engines by one remote controller simultaneously. Maximum working current is 10A for each channel. You may be wondering how it works. Let’s show you how to control speed of two motor rotations. 1 x 2 channel dc remote control receiver (S2PFS-DC12) 1 x 6-button remote transmitter (C V-6-2) 1 x dc12v power adapters 2 x dc motors Here comes the wiring. Motor 1 is supposed to be connected to terminals A...

One of our customers wants to control 6 dc motors with transmitter. Each two buttons can switch every motor to rotate from different direction. That is to say, one button to make motor run one direction, another button to make motor go in the other direction. He is wondering if our product can satisfy his need. Here we recommend this model— 12 channel dc remote control switch (S12CA-DC09/12/24 & CV-12) includes one 12-button remote transmitter and one 12-channel receiver. Each remote button controls each channel of receiver on and off. It can be used to control at most 12 same or different on / off electrical devices. But it only can be used to control 6 motors for every two relays in the receiver can control one motor to rotate in forward and reverse. Remote distance is up to 500m. We will make a demonstration to this customer. First, we should prepare those materials. 1 x 12 channel dc remote control receiver (S12CA-DC12) 1 x 2-button remote transmitter (CV-12) 2 x dc12v ...

We are going to demonstrate that our 30 A high power remote controller controls high power motor to rotate in positive and reverse direction. This kind of controller is activated by dc 12v power supply with 30 A current output of each relay. It is very favorable for high power device. It also has four working modes including toggle mode, momentary mode, latched mode as well as momentary + toggle mode. First of all, let’s see material preparation. 1 x 2 channel dc high power remote control receiver (S2PU-DC12) 1 x 2-button remote transmitter (C-2) 2 x dc12v power adapters Some lines Secondly, see the wiring diagram below, B is normally open terminal; C is normally closed terminal and A is common terminal. Connect terminal C to the positive and connect terminal B to the negative. Terminal A is supposed to be connected to the motor. Note: The Power supply of receiver and motor must be provided individually in order to avoid interference between them. Switch on the power O...

Recently, someone came to us to say that he was very interested in our remote control product which is controlled taxi signage. He would like to install it on his hotel indigo building. So he asked some advices about installing and operating it. He wanted to call the taxi men for his clients with lighting this signage at night. We will recommend the model of DC long distance RF remote control 0020504 (S1U-DC12-ANT2+CB-2L) Working distance of transmitter and receiver with external extend antenna is up to 2000m (6000ft). One or several transmitters can control one receiver simultaneously. So that you can remote controls the receiver which is installed on taxi signage from different directions and reliable distance with more than one transmitter. The RF signal can pass through doors, walls and trees as well as other barriers. The lighted taxi signage will be connected to the receiver’s normally open terminals B&C. He can supply power to taxi signage and re...

Electromagnetic lock is a locking device that consists of an electromagnet and an armature plate. The principle behind an electromagnetic lock is the use of electromagnetism to lock a door when energized. Essentially it consists of an electromagnet attracting a conductor with a force large enough to prevent the door from being opened. That is to say, if only we could cut off power supply and make electromagnet force between electromagnet and armature plate to disappear, the door would be opened. Furthermore, we just try to use a direct dc output momentary remote and one button transmitter to cut off electric power to open the door. The following demonstration will show. At first, we prepare material. The wiring When we supply power to electromagnetic lock, electromagnet will attract armature plate through magnetic force. The door is locked. When we press button, the power supply will be cut off. The door is open as soon as electromagnetic lock unlock instantly. What’s more, t...

Do you want to use one existing device to control another device remotely? Maybe that will be more convenient to you on some special ccasion. In fact, we have a completely new product low voltage triggered great range transmitter of CB-2V which is applied for one device controlling another device. This transmitting module will be triggered by DC power 5~28V input. We really hope this kind of remote can satisfy customers’ needs. We think our product can meet his need. According to his requirement, that transmitter can work   with dc 12V 1 channel latched long range receiver model of 0020522 S1L-DC12-ANT2. He said that the relay, which is activated by receiver, needs low voltage and current. Working voltage range of relay can be DC 0~28V.  So this receiver is more favorable for him.     Let’s study the wiring diagram. That is fairly simple. Existing device is connected to the positive and negative terminals of the transmitter. The device being contr...

These are transmitter and receiver. With external extended antenna of the receiver, the whole kit’s transmitting distance can reach 2000m (6000 ft). Maximum working current is 10A. The RF signal can pass through doors, walls and trees as well as other barriers. It is applied to hotel lighted taxi mark of very prominent hotel in downtown. A manager wants to remotely control lighted taxi mark outside of hotel at night (The taxi is not allowed to drive too close in front of hotel gate). When clients need to call taxi, receptionist in hotel can press big button on the transmitter. Then the taxi mark will shine. When taxi driver see lighted mark, he will come to drive client.When client is carried away, receptionist can press small button switch off the taxi mark. Receptionist is very pleased with the operation of the taxi mark and enjoys the great range of the remote control. Such a solution is an effective way to avoid running b...

This rf remote control transmitter & receiver 0020521 (S1XL-DC12-ANT2 & CB-2V) can be used in such a situation when you want to use an electrical device to remotely control another device. It features in long distance and direct power output functions. Remote distance is 2000m (in open field). The input and output power are the same as DC 12V. Easy to wire and operate.  Next we will explain how it works in detail. We take one led lamp as the original device, the other one as the device being controlled. The transmitter has two extended wires. They are connected to the original led lamp to send out rf signal. The receiver is for receiving the signal. The led lamp being controlled is connected to the receiver. When the original led lamp is on, the led lamp being controlled will be switched on automatically. Firstly, choose one led lamp to be the original device. Solder the red wire on transmitter to the output terminal “+” of the lamp and the black wire to th...

James has a water level sensor to detect both low and high level of water in tank. When it detects water in low level, he will switch on the water pump. When it detects water in high level, he will switch off the water pump. Now He wonders if there is some kind of rf remote control kit to make things easier. The rf remote control kit includes remote transmitter and receiver. Supposing the remote transmitter is wired to the water level sensor and the receiver wired to the water pump motor. When the water level sensor detects low water level, the transmitter will send a signal to the receiver. After the receiver receive the signal, the water pump will be switched on automatically. Likewise, when the water level sensor detects high water level, the water pump will be switched off automatically. So he no longer has to switch water pump on and off by hand. He comes to ask us and we tell him that we have this kind of rf remote control kit . According to his requirement, we select model...