What if you motorize your swing shutters?

Who says you can't motorize your swing shutters? Just like roller shutters, these are motorizable! So don't give up the advantages of automation anymore!
rf remote control

Good reasons to motorize your swing shutters

Motorize your swing shutters? It's about improving your comfort first. Once motorized, the swing shutters can be controlled remotely. Of course, this will reduce the constraints, especially for the elderly or people with reduced mobility but also, when the window is difficult to access.

Always concerning the comfort, thanks to the motorization, the control, i.e. the closing of the shutters can be centralized. In this case, it is no longer necessary to go around the house to close the shutters one by one.

The solution will also enhance home security. Quite simply because the motorization will increase the resistance of the shutters to attempted break-ins. Speaking of resistance, even in strong gales of wind, the closed position will always be maintained thanks to automation.

On the aesthetic side, contrary to what one might think, remote control blinds are nothing unsightly! Indeed, the mechanical device knows how to be discreet.

Flap damper motorization: the choices available to you

Two choices are available to you when you want to motorize your swing shutters:

Wired motorization
Wireless motorization

As its name suggests, a wired motor uses electrical wiring. This type of motor will be connected to a wall switch via wires. It is the switch in question that controls the control (opening, closing and stopping the shutter). More complex, the installation of a wired motor requires a certain know-how in electricity.

Wireless motorization is based on radio waves. Powered by batteries, it is equipped with a radio receiver, which communicates remotely with an rf remote control. Yes, you will have understood it, the control of the shutters is done via a remote control. Thanks to the advanced technology, it is even possible for you to control your automation with your Smartphone or your tablet! The advantage of the wireless actuator is that it is easy to install.

Comments

Post a Comment

Popular posts from this blog

Short Description of Toggle / Momentary / Latched Working Modes

Generally there are three working modes for rf remote controls: toggle, momentary, latched. Toggle mode is used most often. Controlling lamp, for example, press the button of remote, turn on the lamp; press the button again, turn off the lamp. Momentary mode can be set to control rolling blind or rolling door. Press and hold the button of remote, open the blind or door; release the button, close the blind or door. Both toggle and momentary mode are motivated by single relay, which means you can work these two modes with single button remote. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time, e.g. press remote button A, relay A will be on, and relay B will be off; press remote button B, relay B will be on, and relay A will be off. To be more specific, when you control the lamp by latched mode, you should prepare at least two buttons remote. Press button A, the lamp is on; press button B, the lamp is off. Online s...
Read more

Remote Control Electromagnetic Lock

Image
Electromagnetic lock is a locking device that consists of an electromagnet and an armature plate. The principle behind an electromagnetic lock is the use of electromagnetism to lock a door when energized. Essentially it consists of an electromagnet attracting a conductor with a force large enough to prevent the door from being opened. That is to say, if only we could cut off power supply and make electromagnet force between electromagnet and armature plate to disappear, the door would be opened. Furthermore, we just try to use a direct dc output momentary remote and one button transmitter to cut off electric power to open the door. The following demonstration will show. At first, we prepare material. The wiring When we supply power to electromagnetic lock, electromagnet will attract armature plate through magnetic force. The door is locked. When we press button, the power supply will be cut off. The door is open as soon as electromagnetic lock unlock instantly. What’s more, t...
Read more

AC Lamp is Controlled by Customized Delay Time RF Remote Controller

Image
We recommend 1channel 110V~220V customized delay time controller (S1RD-AC220+C-2). At first, it must be set delay time in advance. According to your own actual requirement, you can set delay time you want. e. g. delay time: 20 seconds. You cannot change delay time once it is set. It is applied for controlling lights, motors, fans, electrically operated door/ lock/windows/ blinds/ cars or other appliances with AC 110~240V or DC 0~28V. You can turn on/off device on the receiver with transmitter from any place within reliable distance (theoretical distance 100m), the wireless RF signal can pass through wall, floors, doors and other obstacles. Wiring: Initial state: B, C = Normally Open; A, B = Normally Closed. AC lamp is wired to normally open terminals B&C. And add additional ac power to AC lamp. The delay time is set in advance. It is non-adjustable.   Press button 1: Turn on the relay (connect B and C, disconnect A and B) After ...
Read more