How, when and why empty a motorcycle?

Changing your motorcycle's engine oil regularly can save you money in the short term, extend its life and improve its performance. This is a simple but necessary operation and since most bikes don't have a sensor that tells you when to do it, you need to take the initiative and know when to change it. You will see how step by step you will perform this operation brilliantly.
remote control dc motor

How?

1) Drain your oil
Use a basin or other safe container, remove the drain plug and oil pan while the engine is still warm (take a short walk to warm it up), making sure the motorcycle is upright. This will ensure that all the oil is evacuated, preferably overnight. Do not attempt to start the engine while it is drained of oil. Consider preserving the environment by taking used oil to a landfill.

Two steps to change the oil.

2) Change oil filter
When you change the oil, you must also change the oil filter, which will ensure that your fresh oil works as efficiently as possible. Remove the old filter and fit the new one. Remember to place the O-rings correctly to avoid leaks. Make sure not to overtighten the new filter.

3) Fill with new oil
Before pouring your new oil into the remote control dc motor, make sure the oil filter is properly attached. Finally, check your manual for the recommended amount, then pour into the tank. Don't overfill.

Always check the oil level again after the first trip and complete accordingly.

When?

The motorcycle oil change should be done every six months or after 5000km.

Why? Why?

In an internal combustion engine, oil does not just reduce friction to limit heating and wear. It is there to cool, clean the engine and protect parts from corrosion.

Composed of long molecules that produce a film that is both very thin and resistant, it is constantly subjected to shearing forces and temperature variations that cause it to age.

Over time, it takes up impurities circulating in the engine (metal residues, clutch lining, dust absorbed via the intake, etc.) which it deposits in the oil filter.

In fact, it degrades, turns black and its performance decreases. It is then that his replacement becomes necessary.

Comments

Popular posts from this blog

Short Description of Toggle / Momentary / Latched Working Modes

Remote Control Electromagnetic Lock

AC Lamp is Controlled by Customized Delay Time RF Remote Controller