Video of Remote Controlling Motor

This 1 channel dc rf remote control system operates in 315/433MHz frequency, voltage of AC110~240V or DC0~28V. It is great for hard to reach lights or other DC/AC electrical devices, remote distance is up to 2000m. Applications include light remote control, electric gate remote control, electric window / blind remote control, etc.

 

More details


Online shop: http://www.carymart.com/

Comments

Post a Comment

Popular posts from this blog

Remote Control Electromagnetic Lock

Image
Electromagnetic lock is a locking device that consists of an electromagnet and an armature plate. The principle behind an electromagnetic lock is the use of electromagnetism to lock a door when energized. Essentially it consists of an electromagnet attracting a conductor with a force large enough to prevent the door from being opened. That is to say, if only we could cut off power supply and make electromagnet force between electromagnet and armature plate to disappear, the door would be opened. Furthermore, we just try to use a direct dc output momentary remote and one button transmitter to cut off electric power to open the door. The following demonstration will show. At first, we prepare material. The wiring When we supply power to electromagnetic lock, electromagnet will attract armature plate through magnetic force. The door is locked. When we press button, the power supply will be cut off. The door is open as soon as electromagnetic lock unlock instantly. What’s more, t...
Read more

Wireless Remote Control Power Strip

Image
Power strip is a block of electrical sockets that attaches to the end of a flexible cable (typically with a mains plug on the other end), allowing multiple electrical devices to be powered from a single electrical socket. Power strips are often used when many electrical devices are in proximity, such as for audio/video and computer systems. They are reliable, convenient and cost-effective. But you still have to press the socket switch by hand to power up and down the devices. So how about using our rf remote controller to control the power strip? We can wire the power strip to the receiver and use wireless transmitter to control it. Now let's have a try. First of all, we prepare things as follows: 1 x ac high power rf remote controller 100m 1 x power strip 3 x lamps 1 x power plug for the receiver Supposing the power strip is applied to powering 3 lamps up and down. Then we start wiring. Connect the power plug wires to the input terminal of receiver, so that it c...
Read more

Four-button wireless remote control transmitter (IC PT2262 / SC2262)

Image
There are two types of wireless remote transmitters: electromagnetic waves and infrared. The working distance of the infrared remote transmitter is short, and the infrared ray can only be transmitted through the straight line, and can’t bypass the barrier. RF remote transmitter uses the RF signal, it is transmitted in all directions, and the signal can cross a certain barrier. The electromagnetic wave wireless remote control system uses the transmitter to transmit the electromagnetic wave, and the receiver extracts the electromagnetic wave and triggers various devices. The electromagnetic wave wireless remote control system commonly used in burglar alarm equipment, industrial equipment, doors and windows remote control, car remote control. The following describes a commonly used four-button wireless remote control transmitter, the parameters are as follows: Working voltage: DC12V (23A / 12V battery) Working current: 10mA / 12V Modulation method: ASK Frequency: 315MHz / 433M...
Read more