Two-way Long Range Remote Control Light at the Restaurant

We are looking for a remote control kit to remote control light through a hallway at a restaurant. It is meant to signal the server that food is ready in the kitchen. We are looking at the Long Range 2000M 1 CH Momentary Remote Control Kit. This looks like a reliable solution but I have a question... Is there any way of knowing if the light attached the receiver is actually turned on without seeing it. I realize the bulb may blow now and then, but on the whole they need to be sure in the kitchen when they signal the server the light is actually on. We look forward to this solving our problem with one of you products.

We recommend this customer to choose model: 0020104 (S1PUW-DC12-ANT2 & CC-2 or CC-1). According to his description, he wants a remote control kit that has two-way function or feedback function. This model is definitely suitable for him to remote control light at his restaurant. 
The long range remote control kit has feedback function which can let the user know whether he/she had already connected the transmitter and receiver successfully in such a long distance. Two ways working mode, when the receiver gets the signal of transmitter, it will immediately send a return signal to the transmitter.

The remote control kit can be used to control both DC0~28V and AC110~240V equipments.
Notice: The receiver is relay output, not DC/AC power output. Initial state of relay output terminals: Terminals A and B are Normally Open; Terminals A and C are Normally Closed.


  

If you want to remote control a DC12V light, do as following:
1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.
2) Connect Terminal A to the positive pole of the light, connect Terminal B to the positive pole of the power supply, and connect both light and power supply’s negative pole.

If you want to remote control an AC220V light, do as following:
1) Connect DC12Vpower adapter “+” to terminal “L / +” and Connect DC12V power adapter “-” to terminal “N / -“.
2) Connect Terminal A to the light, connect Terminal B to the live wire of the power supply, and connect light and power supply’s neutral wire.

 By using this long range remote control kit to remote control light, the server of the restaurant can easily know whether the food is ready or not in the kitchen. This will bring a lot of convenience for all the members of the restaurant. In addition, such method may let the customers feel more satisfied because it will shorten their time for waiting their food.

If you have the similar problem like this customer, or in other words, if you want to remote control light, you can enter into our website to choose the remote control kit you like.         
Online shop:www.carymart.com.

Comments

Post a Comment

Popular posts from this blog

Short Description of Toggle / Momentary / Latched Working Modes

Generally there are three working modes for rf remote controls: toggle, momentary, latched. Toggle mode is used most often. Controlling lamp, for example, press the button of remote, turn on the lamp; press the button again, turn off the lamp. Momentary mode can be set to control rolling blind or rolling door. Press and hold the button of remote, open the blind or door; release the button, close the blind or door. Both toggle and momentary mode are motivated by single relay, which means you can work these two modes with single button remote. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time, e.g. press remote button A, relay A will be on, and relay B will be off; press remote button B, relay B will be on, and relay A will be off. To be more specific, when you control the lamp by latched mode, you should prepare at least two buttons remote. Press button A, the lamp is on; press button B, the lamp is off. Online s...
Read more

Remote Control Electromagnetic Lock

Image
Electromagnetic lock is a locking device that consists of an electromagnet and an armature plate. The principle behind an electromagnetic lock is the use of electromagnetism to lock a door when energized. Essentially it consists of an electromagnet attracting a conductor with a force large enough to prevent the door from being opened. That is to say, if only we could cut off power supply and make electromagnet force between electromagnet and armature plate to disappear, the door would be opened. Furthermore, we just try to use a direct dc output momentary remote and one button transmitter to cut off electric power to open the door. The following demonstration will show. At first, we prepare material. The wiring When we supply power to electromagnetic lock, electromagnet will attract armature plate through magnetic force. The door is locked. When we press button, the power supply will be cut off. The door is open as soon as electromagnetic lock unlock instantly. What’s more, t...
Read more

AC Lamp is Controlled by Customized Delay Time RF Remote Controller

Image
We recommend 1channel 110V~220V customized delay time controller (S1RD-AC220+C-2). At first, it must be set delay time in advance. According to your own actual requirement, you can set delay time you want. e. g. delay time: 20 seconds. You cannot change delay time once it is set. It is applied for controlling lights, motors, fans, electrically operated door/ lock/windows/ blinds/ cars or other appliances with AC 110~240V or DC 0~28V. You can turn on/off device on the receiver with transmitter from any place within reliable distance (theoretical distance 100m), the wireless RF signal can pass through wall, floors, doors and other obstacles. Wiring: Initial state: B, C = Normally Open; A, B = Normally Closed. AC lamp is wired to normally open terminals B&C. And add additional ac power to AC lamp. The delay time is set in advance. It is non-adjustable.   Press button 1: Turn on the relay (connect B and C, disconnect A and B) After ...
Read more